· 5 min read
Playing back recordings
Replaying a recorded drive in RemotiveStudio and RemotiveCLI, and why that helps with debugging, development and regression tests.
· 5 min read
Sniffing CAN traffic and making sense of it
Capture raw CAN traffic with candump, then decode it with a DBC in RemotiveTopology and RemotiveStudio.
· 5 min read
Running topologies in CI
Start a RemotiveTopology in a GitHub Actions job, run pytest against it, and tear it down again.
· 5 min read
A basic restbus, watched from a dashboard
Simulate the rest of the network's periodic frames with a restbus, then change signal values while it runs and watch the result in a RemotiveStudio dashboard.
· 5 min read
Integrating an FMU with Python
Run a Functional Mock-up Unit (FMU) as a behavioral model in RemotiveTopology, with a few lines of Python that map bus signals to FMU inputs and outputs.
· 5 min read
Named values in RemotiveStudio and Python
What named values are, where to find them in RemotiveStudio, and how to read and write them from Python.
· 5 min read
Visualizing a topology, platform and instance
A worked example of looking at a RemotiveTopology platform and an instance built from it, with the CLI and in RemotiveStudio.
· 1 min read
Welcome to the RemotiveLabs developer blog
Short, technical articles from the people building RemotiveLabs.