---
title: "Wireshark and Edgeshark"
description: "Capture and inspect traffic between topology containers with Wireshark and Edgeshark, including SOME/IP and CAN decoding and Podman setup."
source: https://developer.remotivelabs.com/docs/remotive-topology/usage/run/wireshark
last_updated: 2026-11-20
---

# Wireshark and Edgeshark

By using **Edgeshark** all messages can be visualized with [Wireshark](https://www.wireshark.org/). Some/ip and CAN messages are detected out of the box and partially decoded. Below are short getting-started instructions. Detailed instructions on how to start and use Edgeshark can be found on https://edgeshark.siemens.io/.

**Note**: if you're using Podman, Edgeshark doesn't work without additional configuration. Please read the section below for how to get it running.

1. On the host, where all the other containers are running do:

```
wget -q --no-cache -O - \
  https://github.com/siemens/edgeshark/raw/main/deployments/wget/docker-compose-localhost.yaml \
  | DOCKER_DEFAULT_PLATFORM= docker compose -f - up
```

2. Wireshark, to visualize install plugin (where you run Wireshark (this is slightly tricker)) [https://github.com/siemens/cshargextcap](https://github.com/siemens/cshargextcap)
3. Go to `http://localhost:5001/` click the diagram

## Edgeshark on Podman

Due to some incompatibilities between Podman and Docker, the docker-compose files for Edgeshark don't work with Podman out of the box. You can find a in the [`edgeshark_for_podman` folder in the examples repository](https://github.com/remotivelabs/remotivelabs-topology-examples/tree/main/edgeshark_for_podman). To use it:

1. Download the `docker-compose-localhost-podman.yaml` file from the link above.
2. Run `podman compose -f docker-compose-localhost-podman.yaml up`.
3. Open `http://localhost:5001` in your browser.

To enable the interaction with Wireshark, you also need to install the `cshargextcap` plugin for Wireshark from [https://github.com/siemens/cshargextcap](https://github.com/siemens/cshargextcap).

## Edgeshark screenshots

The pictures below shows the connections between the running containers. By clicking the blue _shark fins_(e.g. Wireshark symbol) Wireshark opens and allow inspection in that specific connection.
![[Image] Edgeshark](https://developer.remotivelabs.com/img/remotive-topology/edgeshark.png)
![[Image] Edgeshark](https://developer.remotivelabs.com/img/remotive-topology/edgeshark_top.png)
![[Image] Edgeshark](https://developer.remotivelabs.com/img/remotive-topology/edgeshark_bottom.png)

## Wireshark screenshots

Image below shows a `notification` on the `some/ip` bus. Decoder can be selected by right clicking the a line in the trace window.
![[Image] Wireshark SOME/IP](https://developer.remotivelabs.com/img/remotive-topology/wireshark_someip.png)
Image below shows traffic on a selected `CAN` bus. In this case it's `00`
![[Image] Wireshark CAN](https://developer.remotivelabs.com/img/remotive-topology/wireshark_can.png)
